360 DEGREE DELFLECTION TOOLS
Stock # | Description | Cleans I.D. |
---|---|---|
291360 | I.D. Tool Complete | 1" - 2" |
291361 | Centering bolt | |
291362 | Deflector tip, carbide | |
291363 | Body, carbide lined | |
291365 | Extension lance | |
291367 | Reducer, carbide 1-1/4" NPSM |
MUB Jr. Tool
This unit consists of multiple carbide and steel components. Designed to connect to a 3/8” NPT pipe lance (customer furnished) with the tool at one end and the tungsten carbide reducer (supplied with # EE01098 model) at the other, the reducer threads into standard 1-1/4” NPSM nozzle holder. Aluminum oxide, silicon carbide or heavy steel shot not recommended.
Maximum abrasive mesh size = 30.
Air requirement = 80CFM @ 100PSI
STOCK # | DESCRIPTION | CLEANS I.D. |
---|---|---|
EE01098 | MUB-HB Jr. Tool c/w centering collars kit and tungsten carbide reducer | 3/4" - 2" |
EE01099 | MUB-Jr. w/Centering Collars, less reducer | |
EE01100 | Deflector tip, tungsten carbide | |
291577 | Deflector tip, Roctec'500 | |
EE01115 | Reducer only, tungsten carbide |
Circle Blast Jr. Tool
Tool consists of 4 components: main body, quad bore tungsten insert, carbide deflection tip and tip holding bolt. Mounts externally to 1-1/8" O.D. (1/2" I.D.), abrasive blast hose. Aluminum oxide not recommended.
Air requirement = 385CFM @ 100 PSI

STOCK # | MODEL | DESCRIPTION | CLEANS I.D. |
---|---|---|---|
291591 | MUB-CBJR | Tool, Complete, TC | 1-1/4" - 3" |
291562 | EE01078 | Deflector tip, tungsten carbide | |
291554 | EE20968 | Deflector tip, boron carbide | |
291568 | 1888900 | Deflector tip, Roctec'500 |
MUB 360 I.D. Blast Tool
1-1/4” NPSM thread, steel jacketed I.D. nozzle consisting only three parts: tungsten carbide lined body, large carbide tip and tip holding bolt. Aluminum oxide not recommended.
Air requirements = 225CFM @ 100PSI

STOCK # | MODEL | DESCRIPTION | CLEANS I.D. |
---|---|---|---|
291400 | MUB360 | I.D. tool complete | 2" - 5" |
291402 | MUB360DT | Deflector tip only, tungsten carbide | |
291404 | MUB360DB | Deflector tip only, boron carbide |
MUB Senior I.D. Blast Tool
This unit consists of multiple tungsten carbide, steel & rubber components and offers two optional centering devices based on job requirements. Aluminum oxide and silicon carbide are not recommended to use with this piece of equipment. #20 Mesh abrasive is the maximum abrasive size to be used with MUB-Sr.
Air requirement = 225CFM @ 100 PSI

STOCK # | MODEL | DESCRIPTION | CLEANS I.D. |
---|---|---|---|
EE01076 | MUB-Sr | Tool only, complete | 2" - 3" |
291553 | MUB-SRCC | Tool c/w centering collars | 3" - 5" |
291555 | MUB-SRSC | Tool c/w scissor carriage | 5" - 12" |
291559 | SRCC | Centering collars, kit only | |
291556 | SRSC | Scissor carriage assy w/ sleeve and nut | |
291562 | Deflector tip, tungsten carbide | ||
291554 | Deflector tip, boron carbide | ||
291568 | Deflector tip, Roctec'500 |