Remote Control Exhaust / Combo Valves
Auto Air Valve
The auto air valve allows for the control of airflow with a minimum amount of pressure loss. The valve comes in various sizes and with different options to meet any requirement.
| STOCK # |
|---|
| 280750 (3/4" Valve) |
| 281000 (1" Valve) |
| 281250 (1-1/4" Valve) |
| 281500 (1-1/2" Valve) |
| EE2123-006-99 (3/4" - 1" Service Kit) |
| EE2123-007-99 (1-1/4" - 1-1/2" Service Kit) |
Hi-Volume Auto Air Valve
Built for larger air volumes and recommended when using large bore (#8+) blast nozzles. Ideally suited for use with multi-outlet or multi-nozzle equipment. i.e.: Vortex 4000, Little Bully, PRD and other spinblast equipment.
| STOCK # |
|---|
| EE2123-108L (1-1/2" Full Flow Valve) |
| EE2123-109 (2" Full Flow Valve) |
| EE2123-009-99 (Repair Kit) |
MDV (RMS) Exhaust Valve
A 3/4” NPT port outlet valve ensures fast depressurization, equipped with a replaceable rubber diaphragm.
| STOCK # |
|---|
| 290735 (Valve) |
| 290380 (Service Kit) |
1" Diaphragm Outlet Valve
Fewer wear components
Faster vessel blow down. Can be used on virtually any pressure release style control system, very low maintenance.
| STOCK # |
|---|
| EE03371 (Valve) |
| EE06149 (Diaphragm) |
1" Blast Pot Muffler
Stackable design, Heavy duty internal diffuser, Ideal for use with 1” diaphragm dump, valves Improved blow down noise tone
| STOCK # |
|---|
| 290345 (1" Muffler Complete |
| 290346 (Body) |
| 290348 (Diffuser) |
C-Valve Dual Valve
A combination inlet/outlet valve, 3/4” blast hose is used to exhaust air from blasting vessel
| STOCK # |
|---|
| EE2223-000 (Valve) |
| EE22230-0099 (Service Kit) |
Bullet II Remote Control Valve
This combination inlet/exhaust control valve incorporates the same internal components as the Bullet I Valve, however, it is much more refined in its design. It is also 20% lighter than the Bullet I
| STOCK # |
|---|
| EE2225-000 Bullet II Valve, Complete |
| EE22230-0099 Service Kit |
1" Abrasive Trap II
A freshly engineered abrasive trap, utilizes the same replacement screen as the original OEM design, cast iron construction, powder coated, cyclonic, action trap, ensuring radial dispersion of dust and abrasive particles across the entire screen surface.
| STOCK # |
|---|
| EE02017 (Valve) |
| EE02012 (Screen) |
